ENN: Environmental News Network [[ ENN Garden Tutorials ]]
Click picture to enlarge |
What you need:
Mounting a cedar lattice trellis is simple. First, dig two holes using a posthole digger. Space the holes the same distance apart as the trellis legs and 3-4 in. deeper than the length of the legs. |
Click picture to enlarge |
| Add about 5 in. of 5/8 in. gravel to the holes. Tamp the gravel firmly with a 2×4 to create a stable base. |
Click picture to enlarge |
| Place the legs in the holes with the bottom rung 1 in. above ground level. If the top of the trellis isn’t level, add gravel on the low side. Attach two 3-4 ft. lengths of 2×2 or 1×2 lumber to opposite sides of the trellis with one screw each to stabilize the trellis while you plumb it. |
Click picture to enlarge |
| Use a post (or other spirit) level to plumb the trellis. |
Click picture to enlarge |
| Fill the holes with more gravel. Pack the gravel around the posts with a 2×4. Concrete is suitable for permanent installations, but gravel allows easy relocation or removal of the trellis. |
Click picture to enlarge |
| Remove the stabilizing braces, cover the gravel with a thin topping of soil, and you are done. |